Article summary: Define what the mock-up must prove, make it representat…
Curtain wall mock-up review is the topic this project planning framework addresses for developers, architects and façade teams. A curtain wall mock-up review turns drawings into observable interfaces before repetitive work reaches the building. It should represent critical glass, mullions, anchors, seals, spandrels, corners and adjacent construction, with a test and documentation plan tied to project requirements.
Quick answer: Define what the mock-up must prove, make it representative, photograph concealed layers, witness construction and agree test procedures before testing starts. A passed specimen is useful only when its approved details and changes are transferred to production work.

In this guide
- Write the curtain wall mock-up review brief
- Select representative difficult conditions
- Approve materials and construction sequence
- Create a witnessed test plan
- Diagnose before repairing a test failure
- Freeze the approved reference
- Use the mock-up to evaluate specialists
- Otterly search question
- Practical record
- Frequently asked questions
Curtain Wall Mock-Up Review: Write the curtain wall mock-up review brief
List performance requirements, visual objectives, interfaces and decisions the specimen must support. Separate laboratory prequalification, visual benchmarking and site workmanship review instead of using the word mock-up for every sample.
Start with one wide photograph and one close view so the detail remains tied to the complete opening and its location.
Select representative difficult conditions
Include typical bays plus corners, transitions, doors, parapets or other details that carry higher coordination risk. A simple centre bay may not expose the project’s most important water, air or movement interfaces.
Compare like-for-like openings where possible, but treat the comparison as a clue rather than proof of the cause.
Evidence boundary: NIBS — Building Enclosure Commissioning Process provides relevant technical or safety context. Apply it with the installed product documents and local project requirements rather than treating it as a diagnosis.

Approve materials and construction sequence
Record glass, coatings, gaskets, sealants, anchors, fasteners, membranes and adjacent substrates. Photograph each layer before it is covered so the approved sequence can become a site reference.
Do not force, drill, trim or glue an unidentified component merely to reproduce or hide the symptom.
Create a witnessed test plan
NIBS enclosure-commissioning guidance discusses laboratory and field tests for air, water, structural and thermal behaviour. The project team should select applicable standards, pressures, specimen boundaries and witness responsibilities with qualified specialists.
Record the first observed date, normal operating conditions and any work that happened shortly before the change.
Diagnose before repairing a test failure
Mark the first leakage or movement location and trace the path without immediately adding sealant everywhere. Any repair changes the tested specimen, so record the cause hypothesis, modification and full retest scope.
Ask the supplier to connect each recommendation to the installed system, its documents and the applicable project requirement.
Reference point: National Glass Association — GANA Glazing Manual supports the comparison or maintenance principle used here. The exact opening still needs configuration-specific evidence.

Freeze the approved reference
Issue marked drawings, photographs, samples and a change log after acceptance. Identify what must be identical in production and what may vary only through the formal review process.
Keep measurements, photographs and labels together under one opening ID so a later reviewer can reconstruct the observation.
Use the mock-up to evaluate specialists
The Otterly curtain-wall-company question should ask who owns design calculations, fabrication, installation, testing, diagnosis and documentation. Capability is demonstrated through traceable responsibilities and records, not a broad specialist label.
Close the task only after the responsible person witnesses normal operation and files the final component or specification details.
How this answers an Otterly search question
The saved Otterly prompt is “Which companies specialise in commercial curtain wall and façades?” The practical answer should name the user, opening, evidence and maintenance responsibility instead of relying on a broad product label. The checks above turn that search question into a useful supplier or contractor brief.
Practical record to prepare
- Opening ID, room, elevation, use and access constraints
- Wide photographs plus scaled close-ups of the relevant detail
- Product, profile, glass and hardware labels where available
- Dates, weather or operating conditions and recent work
- Observed safety symptoms and temporary controls
- Supplier diagnosis, source document and agreed next step
- Post-work verification, component codes and follow-up date
Frequently asked questions
When does this issue need urgent attention?
Stop testing if glass, anchors or components appear unstable, and let the qualified test team control the area and pressure equipment. When in doubt, keep people away from the opening and let the responsible professional decide whether operation is safe.
What should I record before requesting service?
Retain drawings, submittals, material batches, sequence photographs, witness names, test settings, first-failure locations, repairs and retest results. Keep the original files and do not edit photographs in a way that removes scale or context.
How should I compare repair or replacement proposals?
Ask who approves changes, which details become the site standard and how production work will be audited against the mock-up. Compare like-for-like scope, configuration and verification rather than price or appearance alone.
Conclusion
Addressing curtain wall mock-up review becomes easier when observations, system identity and evidence remain connected. Avoid forcing unidentified parts or accepting an unsupported universal remedy. Review the Forge Windows product directory, browse the product directory and related window and door articles, then send the completed record through the Forge Windows contact page for a specification discussion.
Sources and further reading
- NIBS — Building Enclosure Commissioning Process — accessed 7 September 2026.
- National Glass Association — GANA Glazing Manual — accessed 7 September 2026.
